水电工程下泄生态基流常用计算方法及软件开发

为了分析及确立生态基流,为水电工程环境影响评价提供依据,针对水电工程生态基流估算及决策过程繁复等问题,以2001—2015年水电工程环境影响评价及相关法律法规为基础,分析我国生态基流管理实践中使用最广泛的4种计算方法,即Tennant法、月基本流量法、最小流量法及7Q10法,并编制生态基流决策支持软件,并应用软件在汉江流域进行实例验证。结果表明,该软件能够提供多种计算方法及对比分析功能,可为水电工程下泄生态基流计算及决策提供计算平台。4种计算方法在汉江流域计算结果差异较大。总体而言,干流适合最小流量法及Tennant法,支流适合Tennant法。研究成果具有较大的实际应用和推广价值。     

神东矿区李家壕地下水库人工坝体稳定性研究

为了确定煤矿地下水库人工坝体易破坏位置及极限水头值，对人工坝体建立薄板力学模型，基于弹性力学薄板理论推导得出坝体应力分布函数，以李家壕地下水库为参考，利用FLAC3D数值模拟软件对理论公式进行验证和比较，并分别采用摩尔库伦模型和D P模型对比坝体塑性区分布情况。结果表明：坝体最先破坏位置为正面两侧中心，其次分别为正面底部中心、正面顶部中心、背面中心区域；FLAC3D中使用摩尔库伦模型与理论分析所得坝体破坏情况相符，更准确地反映了坝体破坏特点。对于坝体失稳破坏判断，摩尔库伦模型安全系数高于D P模型，以使用摩尔库伦模型的破坏情况为参考，确定李家壕人工坝体极限水头值为24 m。     

Metallization and Ar‐O plasma effects on dental enamel roughness evaluated with SEM and MeX™ for 3D reconstruction

The MeX? software is a useful tool for tridimensional data collection for surface evaluation and could be relevant to evaluate the same specimen in different phases of the study, assuming repeated measures of dental enamel roughness. The aim of this study was to evaluate the influence of sample metallization for dental enamel roughness analysis with 3D images reconstructed using MeX? software from Scanning Electron Microscopy (SEM) images. The influence of 74.98% (%mol/mol) argon?oxygen plasma for carbon layer removal on surface roughness of the metallized specimen was also evaluated. Dental enamel specimens were prepared for SEM analysis with and without carbon metallization using conventional or environmental modes. Argon?oxygen plasma for carbon layer removal was used and surface roughness was re‐evaluated. Roughness obtained by SEM and MeX? reconstructed images, with or without metallization, did not differ. No significant alteration on surface roughness after carbon layer removal using plasma was found. SEM baseline evaluation using conventional mode without sample preparation and in environmental mode were not comparable. Roughness of enamel 3D images reconstructed with MeX? software from SEM images, with or without metallization was similar. The 74.98% (%mol/mol) argon?oxygen plasma removed the carbon layer with no effect on enamel roughness.     

基于ANSYS FLUENT的超深井长距离膏体充填管道输送模拟研究

为研究超深井长距离膏体充填管道自流输送问题,根据云南某矿山实际充填管路采用Gambit建立三维数值模型,用ANSYS FLUENT软件进行数值模拟计算,以水平管道和弯管为例研究了不同配比、浓度和流量下的管道压力、流速变化规律和管道阻力损失之间的关系。通过井下工业环管的压力监测系统,统计分析矿山井下实际管道压力监测值,井下实际监测结果和采用ANSYS FLUENT软件三维数值模拟研究结果较为接近,表明ANSYS FLUENT软件模拟超深井长距离膏体充填管道输送是可行的,研究结果可为矿山实现超深井、长距离、大倍线条件下膏体充填管道输送提供技术支持。     

基于VSE的大南湖一矿通风系统现状仿真与评估

为了掌握大南湖一矿通风系统现状,科学评估其安全性、稳定可靠性及合理性,对全矿进行了通风参数精准普查,基于VSE软件对通风系统运行状况进行了仿真与评估。结果表明大南湖一矿通风系统存在部分巷道微风、回风大巷风速偏高、井下通风设施较多、部分角联分支易发生风流转向、矿井通风阻力分布不合理等问题,为系统的优化改造指明了方向。     

A review of digital twin in product design and development

In the era of digitalization, there are many emerging technologies, such as the Internet of Things (IoT), Digital Twin (DT), Cloud Computing and Artificial Intelligence (AI), which are quickly developped and used in product design and development. Among those technologies, DT is one promising technology which has been widely used in different industries, especially manufacturing, to monitor the performance, optimize the progresses, simulate the results and predict the potential errors. DT also plays various roles within the whole product lifecycle from design, manufacturing, delivery, use and end-of-life. With the growing demands of individualized products and implementation of Industry 4.0, DT can provide an effective solution for future product design, development and innovation. This paper aims to figure out the current states of DT research focusing on product design and development through summarizing typical industrial cases. Challenges and potential applications of DT in product design and development are also discussed to inspire future studies.     

Thermal and rheological effects in a classical Graetz problem using a nonlinear Robertson-Stiff fluid model

The present article elaborates the Graetz problem for the Robertson-Stiff fluid model with imposed iso-thermal conditions. The closed-form expression of Robertson-Stiff fluid velocity is obtained. Employing the classical separation of variables approach, the energy equation of the said problem is reduced into an eigenvalue problem. The solution of the eigenvalue problem is developed numerically via the MATLAB built-in algorithm BVP4C. The constants appearing in series solutions are computed by Simpson's rule. The special case of this analysis with appropriate scaling is also applicable for the Bingham, power-law, and Newtonian fluid models. The impact of the dissipation function on Nusselt numbers and mean temperature is also considered. The pictorial representation of average temp7erature and Nusselt number are discussed in the presence of the plug radius, power-law index, and Brinkman number. It is observed that the presence of the plug radius and power-law index delay the prevalence of fully developed conditions for the Nusselt number. Moreover, the local Nusselt number for channel confinement attains higher values as compared with tube confinement. The present investigation has numerous applications in the field of engineering, nanotechnology, biomedical sciences, and development of several thermal types of equipment or microfluidic devices.     

A 3E,hydrogen production,irrigation, and employment potential assessment of a hybrid energy system for tropical weather conditions – Combination of HOMER software,shannon entropy,and TOPSIS

The increasing threat to environmental sustainability as a result of greenhouse gas (GHG) emissions from fossil fuel base power plants has necessitated the need to find sustainable energy sources to meet the world's energy demands. This study focuses on assessing the potential of a hybrid power plant for the production of electricity, hydrogen for the production of fertilizer for agricultural activities, farmland irrigation, environmental impact as well as its employment potential in northern Ghana. The Shannon entropy weight and TOPSIS multi-criteria decision-making approach were adopted to rank and identify the optimal configuration out of five possible options for the study area. Results from the simulation show that the winning system, i.e., Hydro + Battery system would generate a total electricity of 1,095,679 kWh/year. A cost of electricity of 0.06 $/kWh with an operating cost (OC) of $18,318 was recorded for the winning system. The total produced hydrogen by the optimum configuration is 8816 kg/year at a levelized cost of hydrogen (LCOH) of 4.47 $/kg. The quantity of low-carbon fertilizer that can be produced from the produced hydrogen is also assessed. The optimum configuration also recorded an employment potential of 4 persons in 25 years. A total GHG equivalence of 383.49 metric tons of CO₂ equivalent indicating the level of emissions that will be avoided should the optimum system be used to meet the demands specified in this study was obtained.     

乙烯-乙酸乙烯酯共聚物Levapren 800硫化胶溶度参数的测定及应用

采用溶胀实验及计算机HSPiP软件对牌号为Levapren 800的乙烯-乙酸乙烯酯硫化胶的溶度参数进行了研究。结果表明,单一溶剂与混合溶剂都可用于Levapren 800硫化胶溶度参数的测定,用溶胀法测得其一维溶度参数(δt)为18.90~19.25(J/cm3)1/2。通过HSPiP软件测得Levapren 800硫化胶的δt为19.97(J/cm3)1/2;三维溶度参数的色散力、极性力和氢键力溶度参数分别为18.20,5.50,6.10(J/cm3)1/2。利用三维溶度参数可以预测Levapren 800硫化胶在标准实验油中的溶胀行为;相对能量差对预测聚合物在溶剂中的溶胀性能方面具有一定的应用价值。     

乙苯负压脱氢制苯乙烯大型实验装置自动控制系统设计

随着我国高等学校各项建设工作的大力推进,实验设备的需求也逐渐丰富起来。传统的化学工程专业实验设备的控制简单,与现今的大工业生产的装置自动化程度相比,有一定的脱节。这对于高校培养具有创新能力的"技术型"和"应用型"人才是不利的。华东理工大学化工学院的化学工程与工艺专业实验中心自主设计具有计算机控制的,能适应本专业学生的大型化工流程实验装置——乙苯负压脱氢制苯乙烯装置,运用MCGS工控组态软件对乙苯负压脱氢制苯乙烯装置进行自动控制系统的设计,实现了对脱氢装置的实验过程的监控,从而达到了实验的要求。